VESA adapter for Huawei

VESA adapter for Huawei: the most important questions

Do you want to mount your Huawei monitor on a monitor arm or the wall, but nothing fits on the back? You will find the right adapter for every tested Huawei model here. Each is built for specific models and attaches exactly where the stand would otherwise click into place.

Why does my Huawei monitor not have a VESA mount?

With Huawei, it often depends on the version: The same model is available with an adjustable stand and VESA mount, and in a basic version without. The adapter is for the basic version.

How do I know which adapter my Huawei monitor needs?

Check the exact designation of your version. If your monitor has the mount, you do not need an adapter, just the right screws.

Which screws do I need if my Huawei has VESA?

According to Huawei, M4 screws with a thread length of 8 to 10 mm. Longer screws may bottom out in the housing before they grip.

Which adapter fits my model?

The one where your full model number appears in the model list. You can find this on the rating plate on the back. You can see the tested models for each adapter at the top and in the list below, or you can enter your model in the Setup-Finder.

Do I have to drill or glue anything?

No. You screw the adapter on instead of the stand; the mounting hardware is included. Nothing is drilled, glued, or opened on the device itself.

Does the adapter fit my mount?

Yes, if your mount has the VESA hole pattern of the adapter, 75 × 75 or 100 × 100 mm. This applies to desk arms, wall mounts, and stands of any brand. If your mount requires a larger hole pattern, a VESA adapter extension will bridge the difference.

Will an adapter hold my monitor securely?

Yes. The adapters are made of high-tensile plastics and metals that retain their shape for years. The weight capacity is determined by your mount: its load capacity must be higher than the weight of your device without the stand.

Can I reattach the stand later?

Yes. Remove the adapter, insert the stand, and you're done. Because nothing is drilled, glued, or opened on the device, it remains in its original condition.

Don't have a mount yet? You can find every monitor mount here.

The adapter does not fit into the mount – what should I do?

Compare the full model number from the rating plate with the list on the adapter, including the suffix. Similar numbers often have different mounts. Never force the adapter into place.

The screws do not grip or are sitting crooked – what should I do?

Use the screws from the adapter's bag, not the ones from the mount, and start them straight. Tighten them by hand first, then tighten them crosswise. If a screw does not grip, check if it is too short or if it is hitting an edge before reaching the thread.

The monitor tilts forward on the mount – what should I do?

Tighten the tilt joint on the head of the mount. It is important that the weight of your device without the stand is within the load capacity of the mount; a heavier device pulls harder on the joint.

The mount does not sit flush against the adapter – what should I do?

Check whether the rear panel is curved or if cable connections are in the way. Spacers will provide the necessary clearance.