VESA adapter for BenQ

VESA Adapter for BenQ: the most important questions

Do you want to attach your BenQ monitor to a monitor arm or a wall, but nothing fits on the back? You can find the right adapter for every tested BenQ model here. Each one is built for specific models and attaches exactly where the stand would otherwise snap in.

Why doesn't my BenQ monitor have a VESA mount?

Most BenQ monitors feature a 100 × 100 mm VESA pattern. However, individual models—mostly older ones from the design and entertainment series—require a conversion plate that is not included in the original box. BenQ even explicitly excludes some of these from the compatibility of its own monitor arm.

How do I know which adapter my BenQ monitor needs?

Look under the stand: four threaded holes in a square pattern mean you don't need an adapter. If they are missing, the adapter will provide you with the hole pattern without having to search for a conversion plate.

Which adapter fits my model?

The one where your full model number is listed. You can find this on the type plate on the back. The tested models are displayed on each adapter at the top and in the list below, or you can enter your model in the Setup Finder.

Do I need to drill or glue?

No. You simply screw the adapter on in place of the stand; the mounting material is included. Nothing on the device is drilled, glued, or opened.

Does the adapter fit my mount?

Yes, provided your mount has the VESA hole pattern of the adapter, 75 × 75 or 100 × 100 mm. This applies to desk arms, wall mounts, and stands from any brand. If your mount requires a larger hole pattern, a VESA extension will bridge the difference.

Will an adapter hold my monitor securely?

Yes. The adapters are made of plastics and metals with high tensile strength that maintain their shape for years. The amount of weight supported is determined by the mount: its load capacity must be higher than the weight of your device without the stand.

Can I reattach the stand later?

Yes. Remove the adapter, insert the stand, and you're done. Because nothing on the device is drilled, glued, or opened, it remains in its original condition.

Don't have a mount yet? You can find every monitor mount here.

The adapter doesn't fit into the mount – what should I do?

Compare the full model number from the type plate with the list on the adapter, including the suffix. Similar numbers often have different mounts. Never insert the adapter with force.

The screws won't catch or are sitting crooked – what should I do?

Use the screws from the adapter bag, not the ones from the mount, and place them in straight. Tighten them by hand first, then tighten them crosswise. If a screw does not catch, check if it is too short or if it is hitting an edge before reaching the thread.

The monitor tilts forward on the mount – what should I do?

Tighten the tilt joint on the head of the mount. It is important that the weight of your device without the stand is within the load capacity of the mount; a heavier device pulls harder on the joint.

The mount does not sit flush against the adapter – what should I do?

Check if the back panel is curved or if cable connections are in the way. Spacers provide the necessary clearance.